Tensile Modulus
Tensile Modulus: Indicates stiffness by measuring resistance to deformation under tension....
Dielectric Properties Analysis
Dielectric Properties Analysis: Evaluates a material’s electrical insulating properties and response to an e...
Hardness Test
Hardness Test: Measures resistance to indentation or surface deformation....
Flexural Modulus
Flexural Modulus: Indicates stiffness under bending conditions....
Impact Strength Test
Impact Strength Test: Measures a material’s ability to absorb energy under sudden impact....
Impact Strength Test
Impact Strength Test: Measures a material’s ability to absorb energy under sudden impact....
Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) is an analytical technique used to detect a...
Nuclear Magnetic Resonance Spectroscopy (PROTON/NMR)
Nuclear Magnetic Resonance Spectroscopy (¹H-NMR / Proton NMR) is an analytical technique used to determine th...
Oxygen Bomb Calorimeter
An oxygen bomb calorimeter is an instrument used to measure the heat of combustion of a sample. The sample is ...
Opacity, Refractive Index
Opacity Opacity refers to how much light is blocked when it passes through a material. A highly opaque subs...
Viscosity, Flash, Fire, Pour Point
Viscosity The measure of a fluid’s resistance to flow. Thicker fluids (like oil) have higher viscosity; t...
Tensile Strength
Tensile Strength (TS) is the maximum amount of stress or force a material can withstand while being stretched ...
Ultimate (CHNS)
Ultimate (CHNS) analysis determines the percentage of Carbon (C), Hydrogen (H), Nitrogen (N), and Sulfur (S) i...
Particle Size Distribution (P.S.D)
Particle Size Distribution (P.S.D) is an analysis used to determine the range and proportion of particle sizes...
Ultraviolet – Visible Spectroscopy (U.V SPEC)
Ultraviolet–Visible Spectroscopy (UV-Vis) is an analytical technique used to measure how much light a sample...
Gas Analyzer
A gas analyzer is an instrument used to detect and measure the concentration of gases in a sample or environme...
Gas Chromatography With Flame Lonization Detection (GCFID)
Gas Chromatography with Flame Ionization Detection (GC-FID) is an analytical technique used to separate and qu...
Chromatography/Mass Spectometry (GC/MS)
Gas Chromatography–Mass Spectrometry (GC/MS) is an advanced analytical technique used to separate, identify,...
High-Performance Liquid Chromatography (HPLC)
High-Performance Liquid Chromatography (HPLC) is an analytical technique used to separate, identify, and quant...
Transmission Electron Microscopy (TEM) ON REPAIR
Transmission Electron Microscopy (TEM) is a high-resolution imaging technique used to study the internal struc...
Thermal Conductivity
Thermal Conductivity Analysis measures how well a material can conduct heat. It determines the rate at which h...
Thermogravimetric Analysis (TGA) & Differential Thermal Analysis (DTA)
TGA measures changes in a sample’s weight as it is heated. It helps determine thermal stability, moisture co...
Brunauer Emmett Teller (BET)
Brunauer–Emmett–Teller (BET) Analysis is a technique used to measure the surface area and porosity of mate...
Mechanical, Hardness, Texture – Coating analysis
This analysis evaluates the strength, durability, surface texture, and hardness of coatings and materials. It ...
Energy Dispersive X-ray (EDX) Alone
Energy Dispersive X-ray (EDX) Analysis is a technique used to identify and quantify the elemental composition ...
Liquid chromatography mass spectrometry (LCMS)
Liquid Chromatography–Mass Spectrometry (LC-MS) is an advanced analytical technique that separates compounds...
Scanning Electron Microscopy (SEM)
Scanning Electron Microscopy (SEM) is a powerful imaging technique that uses a focused beam of electrons to pr...
Nuclear Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
Nuclear Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) is a powerful analytical technique ...
Nuclear Magnetic Resonance Spectroscopy (NMR)
Nuclear Magnetic Resonance Spectroscopy (NMR) is an analytical technique used to determine the structure and b...
Fourier Transform Infrared Spectroscopy (FTIR)
FTIR is an analytical technique used to identify functional groups and molecular structures in a sample by mea...
Atomic Absorption Spectrometry (AAS)
Atomic Absorption Spectrometry (AAS) is a technique used to measure the concentration of metals in a sample. T...
Transmission Electron Microscopy (TEM) ON REPAIR
Transmission Electron Microscopy (TEM) is a high-resolution imaging technique that uses an electron beam trans...
High-Performance Liquid Chromatography (HPLC)
High-Performance Liquid Chromatography (HPLC) is a versatile analytical technique used to separate, identify, ...
Chromatography/Mass Spectometry (GC/MS)
Gas Chromatography–Mass Spectrometry (GC/MS) is a powerful analytical technique that combines the separation...
Gas Chromatography With Flame Lonization Detection (GCFID) /Electron Capture Detection (ECD)
Gas Chromatography with Flame Ionization Detection (GC-FID) and Electron Capture Detection (GC-ECD): Principle...