UV Spectrophotometer

Description

The T70 PG Instruments’ UV- Spectrophotometer was used to analyze the samples at different wavelength and absorption the Spectrophotometer was first switched on and allows to stabilize before the calibration was done using distilled water and a black body. After calibration the wavelength was set to 330nm and the corresponding absorption was displayed after pressing the key for absorption. This step was followed for other wavelength until it gets to 900 nm.

Packaging Instructions

For Liquid samples, per analysis, measure 5ml
Measure 2grams per analysis for solid samples
Liquid samples should be sent in sample bottles, pet bottles, or any air-tight container.
Solid samples should be sent in zip lock bags, sample bottles, or any air-tight container.
Samples should be labeled legibly with paper tape, marker, or writing pen.
Labels should be short and precise (not more than 3 words).
All samples must be strapped together and secured in a bag prior to transport.
Write the Following on the Bag, or Envelope “Allschoolabs Analysis – Receiver: Madison, 08163383206” then add the address of whichever collection center you are sending to.

Other Instructions

For UV, please include in your application, the solvent that was used, method (if its absorbance, transmittance, etc) and wavelength range.

Comments & Questions (0)

Quick Booking

Book this test, request pickup/drop-off, or ask the lab a question before payment.